N
Glam Fame Journal

What does Cor mean in a Metar

Author

Sophia Hammond

Updated on May 04, 2026

COR indicates a corrected observation. Disregard the previous transmission. COR 1725 means that the correction was transmitted at 1725Z. 5. METAR.

What does CB mean in a Metar?

TAF sky condition forecasts use the METAR format. Cumulonimbus clouds (CB) are the only cloud type forecast in TAFs. When the sky is obscured due to a surface-based phenomenon, vertical visibility (VV) into the obscuration is forecast.

What does CIG mean in Metar?

KEY TO DECODING A METAR REPORTMETARTYPE OF REPORTCIG 013V017VARIABLE CEILINGCIG 017 RWY11CEILING HEIGHT AT SECOND LOCATIONPRESFRPRESSURE RISING OR FALLING RAPIDLY

How do you decode a Metar?

  1. PHNL = the airfield, Honolulu’s Daniel K. …
  2. 250953Z = the date and time of the report. …
  3. 05007G17KT = the wind conditions. …
  4. 10SM = visibility. …
  5. FEW024 / FEW040 = cloud cover. …
  6. 27/19 = the temperature and dewpoint. …
  7. A3001 = the atmospheric pressure, a.k.a. altimeter setting.

What is TX and TN in TAF?

TX – Indicator for Maximum temperature. TtTt – Temperature value in Celsius. TN – Indicator for Minimum temperature. HH – Forecast hour, i.e. the time(hour) when the temperature is expected.

What does 8000 mean in a TAF?

MetersSM6,40048,00059,600611,2007

What does P mean in a Metar?

P. indicates greater than the highest reportable value. PCPN. precipitation.

What is the 4 group in a Metar?

Snow Depth on Ground (4/sss). It shall be coded in the 0600 and 1800 UTC observation if there is more than a trace of snow on the ground and more than a trace of precipitation (water equivalent) has occurred within the past 6 hours. The remark shall be coded in the format 4/sss, where: 4/ is the group indicator and.

What is the T at the end of a Metar?

The “0” after the “T” indicates that the temperature and dew point are higher than 0 degrees Celsius (a “1” will follow the “T” when the dew point temperature and /or the temperature is / are less than 0 degrees Celsius).

What does P0000 mean in a Metar?

Pxxxx is precipitation in the past hour in tenths of an inch. P0000 indicates “trace” of precipitation.

Article first time published on

What does 10SM mean in Metar?

10SM. Visibility in meters. Visibility in statute miles (U.S.)

What does SM mean in a Metar?

sea-level pressure. SLPNO. sea-level pressure not available. SM. statute miles.

What is prob 40?

Prob40 = completely definitely will happen (or already has, as half the time TAFs seem to be changed to match the METAR)

What does FM mean in a TAF?

FM is used when rapid changes are expected at the specified time, and is given in: TAF format: FMddhhmm, for example: FM301000 means from 1000 UTC on the 30th or.

What is NSW in a TAF?

NSW (no significant weather)

What does 9999 mean on TAF?

Visibility 9999 means the visibility is greater than 10 km. / / means this part of the METAR is not available (ie cloud and visibility not available from an automated weather station)

What does PROB30 mean in a TAF?

PROB30 means a slight chance. PROB40 means a medium chance. These are ways for the forecaster to show his/her confidence in this part of the forecast. PROB30 means there is a possibility that warrants a mention, but it probably won’t happen.

What does PoP mean in weather?

Forecasts issued by the National Weather Service routinely include a “PoP” (probability of precipitation) statement, which is often expressed as the “chance of rain” or “chance of precipitation”.

How do you read RVR in Metar?

In a METAR, RVR starts with the runway, coded with the letter “R”, followed by the runway number. In this example, “R18R” means RVR is being reported for runway 18 Right. RVR visibility is coded using four digits, representing RVR distance in feet. In this example, “1600” indicates the RVR for runway 18R is 1600 feet.

What does Cavok stand for?

The Visibility, Cloud, and Weather groups are replaced by the term CAVOK (cloud and visibility OK) when the following conditions exist simultaneously: Visibility is 10km or more. No CB or TCU and no cloud below 5000 feet or Minimum Sector Altitude (MSA) (whichever is the greater).

What is shallow fog?

Shallow fog is a low-laying blanket, often extremely localized, that does not obstruct horizontal visibility at 6 feet or more above ground level, according to the National Weather Service. It usually burns off fairly quickly. National Weather Service.

Where is temperature in METAR?

Temperature and dew point are reported in the body of the report. Temperature and dew point in the remarks section shall only be reported in METARs. Maximum and minimum temperatures shall be reported in the remarks section of the METAR.

Is METAR wind true or magnetic?

METAR winds are true and ATIS winds are magnetic, except Digital ATIS. … Digital ATIS comes directly from ASOS which reports winds in true directions.

What is the sky condition when it is 7/8 covered by cloud?

Sky ConditionCloud CoveragePartly Cloudy / Partly Sunny3/8 to 4/8Mostly Cloudy / Considerable Cloudiness5/8 to 7/8Cloudy8/8

What is RMK in TAF?

RMK – Remarks. RWY – Runway. RVRNO – Runway Visual Range not available. SFC VIS – Surface Visibility. SLP – Sea Level Pressure, add 10 to numbers given.

What is the ceiling in a Metar?

In aviation, ceiling is a measurement of the height of the base of the lowest clouds (not to be confused with cloud base which has a specific definition) that cover more than half of the sky (more than 4 oktas) relative to the ground.

What does AO1 mean in a METAR?

AO1 means automated but no precipitation discriminator. The precipitation discriminator will be able to sense the difference between rain and snow. The METAR format is documented in the Federal Meterological Handbook No. 1 in Chapter 12.

What are Metars and TAFS?

METAR is the international standard code format for hourly surface weather observations which is analogous to the SA coding currently used in the US. The acronym roughly translates from French as Aviation Routine Weather Report. … TAF is the international standard code format for terminal forecasts issued for airports.

What does P6SM mean on a TAF?

P6SM means plus 6 statute miles visibility, and 2SM means 2 statute miles visibility.